B+ Magic Mushroom Paddo Grow Kit

How to Grow

How to grow magic mushrooms?

Growing your own psychedelic mushrooms has never been this easy! This magic mushroom growkit contains a completely colonized substrate, a grow bag, and paperclips – it’s everything you need to grow your own magic mushrooms at home.

Step 1

Wash your hands thoroughly and clean the outside of the growkit with a dry cloth. Remove the lid and save it for step 2.

Step 2

Fill the grow kit to the edge with lukewarm water (20°C), put the lid back on the growkit an let it soak for 5 minutes.

*Important: never soak the grow kit for more than 1 hour.

Step 3

Remove the lid from the growkit and drain the water well. Let the growkit drain for 10 seconds.

Step 4

Place the growkit in the grow bag and fill the grow bag with a cup (200-250ml), lukewarm water (20°C). Then fold the top of the bag and close it with the 2 paperclips.

Step 5

Place the growkit in a place with 20-25°C average room-temperature. Make sure that the growkit is not in direct sunlight, not under a lamp and not near a radiator/heat source.*

*Important: the bag must remain closed until the first pinheads form. Until then, the CO2 content and humidity inside the bag should be as high as possible.

Step 6

When the first pinheads* are visible, let some fresh air into the grow bag on a daily basis (for a few minutes) and then moisten the growkit with a misting bottle.

*Pinheads are the first visible forms of tiny mushroom caps. It can take 10 to 20 days for the first pinheads to be visible.

Step 7

The mushrooms can be harvested just before the membranes on the bottom of the cap open up. While harvesting gently grasp the stem and turn it left/right. When the mushroom becomes loose, pull it out as carefully as possible.*

*Important: the mushroom must be completely removed so that there is room for a new one.

Step 8

Congratulations, the harvest is complete. It is now possible to create a new flush by repeating steps 1 to 7 again.